ga('set', 'userId', {{USER_ID}}); // Set the user ID using signed-in user_id. Flexbar casting materials
724 368-8006
Rapp Industrial Sales Surface Finish Equipment
Mahr Pocket Surf IVMahr M1 - M2Mahr Pocket Surf PS1Mahr M300Mahr M300CMitutoyo SJ-410Mitutoyo SJ-210Mitutoyo SJ-310SRG-4000SRG-2000SPIStarrett SR100Starrett SR200Starrett SR300/400Reference StandardsFlexbar MetrologyTesa Rugo surf 10GTesa Rugo surf 20Tesa Rugo surf 90GCalibrationRepairAbout usSRG-4500Mahr S2Fowler XProStarrett SR160 Products
•Exotic Metrology Grade Rubber
•Virtually Perfect Replica Casting of Internal and External Forms
•Non-Toxic & Easy To Use
•100 Times Faster Than TRV Silicones
•Self-Curing in Minutes
•Excellent For Checking Parts With Optical Comparators
•No Release Agent is Ever Needed
Thin Pour Final Color: Light Green For internal-shape applications where a thin pour will completely fill the cavity without voids. A complete replica casting is quickly formed. •Manipulation time is 5 minutes and cure time is 15 minutes.•Start to finish: 20 minutes.•Kits include graduated mixing cups, wooden spatulas and instructions.•Use with REPRO-MIX Dispensing Gun. #16116 - Thin Pour 130ml Trial Kit#16135 - Thin Pour 380ml Kit#16137 - Case of 10 380ml Kits
Quick Setting Putty
Color: Light Blue
Roll two equal balls of catalyst putty and base putty and simply knead them together like dough.
Excellent for external shapes. Simply spread over master pushing down with fingers and wait for cure 8-10 minutes. You have 3 or 4 minutes of manipulation time - Therefore 14 minutes start to finish. You can also cast internal shapes and cavities but some pressure should be applied such as a weighted object on top.
#16129 - 220ml Trial Quick Set Putty
#16130 - 1-3/4 lb. (520mlFinal ) Introductory Kit
#16131 - 7 lb. (2150ml) Economy Kit
REPRORUBBER THIN POUR | REPRORUBBER QUICK SETTING PUTTY | |
Mix Time (Stirring in a cup) | 30 - 45 seconds | 30 - 45 seconds |
Working Time (Manipulation Time) | 4 minutes | 2 minutes (from beginning of mix) |
Setting Time (at room temperature) | 10 - 15 minutes | 6 minutes |
Permanent Deformation | 0.2% | 0.3% |
Dimensional Stability | less than 0.50% | less than -0.25% |
Tear Strength | 44 pounds per sq. inch | 105 pounds per sq. inch |
Elongation | 60% at break | 6.3% at break |
Durometer (Shore A-2) | 30 (at 15 minutes) | 50(at 7 minutes) |
Temperature Stability | 1 week @ 60oC | 1 week @ 60oC |
Detail Reproduction | EXCELLENT | EXCELLENT |
You can take impressions of: | |||
|
|
|
|
Other Uses Include: | |
|
|
Physical Advantages Over the Hard-Copy Replicas: | |
|
|
REPRO-MIX™ SYSTEM CONSISTS OF THE FOLLOWING: |
#16132 -Complete REPRO-MIX™ Kit consisting of 1 each REPRO-MIX™ Dispensing Gun, 10 each 50ml, Dual Barrel Cartridges, 20 each Helix Mixing Nozzle Tips, Caps, Plugs and complete instructions for usage |
Quick Setting Compound
Makes accurate hard plastic reproduction in 6 - 8 minutes
Facsimile is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in out free 24 page appli-cations booklet.
•Make duplicates for measuring, such as gages, etc.
•Test surface geometry, flatness, microfinish, etc.
•Make permanent records of surface geometry, etc.
•Make custom holding and nesting fixtures.
•Make quick jigs.
•Make excellent stylus patterns.
•Make instant mold and patterns.
•Cast small run parts and prototypes.
•Mask, fill in and seal.
•Fretting depth of blade dovetails in jet engines.
•Make potting, bonding and repairing easy.
•Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.)
•Facsimile will not affect the surface of ferrous or non-ferrous materials to which it is applied.
•When casting in a "CONFINED" area, it is better to cat 1/2 of the internal shape.
•When casting without releasing agent, and ACETONE soak removes Facsimile.
AVAILABLE IN LARGER "ECONOMY" KITS
A test submitted by E.I. Dupont DeNemour & Company to an independent test lab showed the following properties of Facsimile®: TEST PIECE APPROXIMATELY 1” BY 1 /4” THICKNESS... COMPRESSION TEST...Maximum load 6,800 lbs. Compression strength 9,650 PSI. MECHANICAL PROPERTIES...Ultimate tensile 3,415 PSI. WATER ABSORPTION...(24 hours at 73 o ) 0.31% by weight. The kit contains all material and instructions. The Facsimile® can be diluted from a putty consistency to a watery to best suit your job needs. If larger quantities of Facsimile® are desired they can be ordered in 3 lb. and 25lb. kits at proportionately lower prices per pound. Facsimile® is Made in U.S.A. |
APPLICATIONS AND TECHNICAL INFORMATION
Facsimile® is 100% Government approved for ANTI-CONTAMINATION and all ATOMIC and NUCLEAR APPLICATIONS by virtue of not containing (even traces of): All Halogens–Mercury–Sulphur–Lead–Copper–Brass–Phosphorous–Zinc–Arsenic–Antimony– Aluminum–Cadmium–Tin–Bismuth–Boron or any compounds thereof. CERTIFICATES WILL BE PROVIDED. | ||||
ORDERING INFORMATION: INTRODUCTORY KIT One Lb. Kit No. 16000 Complete Kit Contains: FACSIMILE POWDER, 1 lb. Troy 01 - 120cc FACSIMILE liquid 01 - 60cc Flexbar Release Agent 01 - Powder scoop 01 - Molding clay 10 - Disposable cups (graduated) 10 - Wooden spatulas 01 - 1 oz. polypropylene measuring cup COMPLETE KITS* 16000 1 lb. Kit FACSIMILE 16003 3 lb. Kit FACSIMILE* 16025 25 lb. Kit FACSIMILE | ||||
REFILLS FOR FACSIMILE KITS Order No. | ||||
For Air Shipments, EXTRA CHARGE for D.O.T. Approved. Containers and Overpacking for Facsimile Liquid only. |
| |||||||||||||
For Reprorubber® Thin Pour and Facsimile® Users MONOJECT PRECISION DISPENSING SYRINGES | |||||||||||||
Provides User With An Easy Method Of Injecting Pre-Mixed Reprorubber or Facsimile Into Small Holes, Grooves or Small Spaces. 10cc capacity syringes are easily filled and disposable once used. Sold in low cost packages of 10 each. Model No. 16190, Monoject 10cc Syringe Pac (10 each) |
Fine Proofing and Fixturing Alloy
Machinable Wax
Magnaflux
724-368-8006 * Fax 724-368-8005