Mahr Pocket Surf  IV

 

Two Sets available

 

 

2191800 EGH-1019 10um probe tip  Certified Specimen

 

2191802 EGH-1026   5um probe tip  Certified Specimen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Features

 

● Pocket-sized economically priced, completely portable instrument which performs traceable surface roughness measure on a wide  variety of

   surfaces; can be used confidently in production on the shop floor and in the laboratory.

 ● Solidly built, with a durable cast aluminum housing, to provide years of accurate, reliable surface  finish gauging.

 ● Can be used to measure any one of four, switch-select-able, parameters: Ra, Rmax/Ry, Rz.

 ● Selectable traverse length 1, 3 or 5 with a cut-off of 0.8mm/.030".

 ● Operates in any position - horizontal, vertical, and upside down.

 ● Four switchable probe positions - axial (folded) or at 90°, 180° or 270°.

 ● Even difficult-to-reach surfaces such as inside and outside diameters are accessible.

 ● Integrated data output for SPC-processing units that is compatible with the most common data processing systems.

 ● Easy-to-read LCD readout presents the measured roughness value, in micro inches or micrometers, within half second

    after the surface is traversed.

 ● Out-of-range (high or low) and "battery low" signals are also displayed.

 ● Improved digital calibration process eliminate screwdrivers and potentiometers to simplify  and enhance the calibration

    process

 

A Pocket Surf is furnished complete in a fitted case, and includes a Pocket Surf unit with a general Purpose Probes** A Pocket Surf is and a 3.2µm/125µinch (nominal) Reference Specimen**, 9 Volt battery, riser plate

and screwdriver

**   Sets

2191800  EGH-1019 10um probe tip Certified Specimen

2191802 EGH-1026  5um probe tip  Certified Specimen