ga('set', 'userId', {{USER_ID}}); // Set the user ID using signed-in user_id. Surface Articles
724 368-8006
Rapp Industrial Sales Surface Finish Equipment
Mahr Pocket Surf IVMahr M1 - M2Mahr Pocket Surf PS1Mahr M300Mahr M300CMitutoyo SJ-410Mitutoyo SJ-210Mitutoyo SJ-310SRG-4000SRG-2000SPIStarrett SR100Starrett SR200Starrett SR300/400Reference StandardsFlexbar MetrologyTesa Rugo surf 10GTesa Rugo surf 20Tesa Rugo surf 90GCalibrationRepairAbout usSRG-4500Mahr S2Fowler XProStarrett SR160 Products
From Wikipedia, the free encyclopedia
"Surface topography" redirects here. For ground/terrain surface topography, see Digital elevation model.
Surface finish, also known a surface texture or surface topography, is the nature of a surface as defined by the three characteristics of lay, surface roughness, and waviness.[1] It comprises the small local deviations of a surface from the perfectly flat ideal (a true plane).
Surface texture is one of the important factors that control friction and transfer layer formation during sliding. Considerable efforts have been made to study the influence of surface texture on friction and wear during sliding conditions. Surface textures can be isotropic or anisotropic. Sometimes, stick-slip friction phenomena can be observed during sliding depending on surface texture
Each manufacturing process (such as the many kinds of machining) produces a surface texture. The process is usually optimized to ensure that the resulting texture is usable. If necessary, an additional process will be added to modify the initial texture. The latter process may be grinding (abrasive cutting), polishing, lapping, abrasive blasting, honing, electrical discharge machining (EDM), milling, lithography, industrial etching/chemical milling, laser texturing, or other processes.
Each manufacturing process (such as the many kinds of machining) produces a surface texture. The process is usually optimized to ensure that the resulting texture is usable. If necessary, an additional process will be added to modify the initial texture. The latter process may be grinding (abrasive cutting), polishing, lapping, abrasive blasting, honing, electrical discharge machining (EDM), milling, lithography, industrial etching/chemical milling, laser texturing, or other processes.
To read the remainder of this definition "click here".
Article 4/15/2015 modern machine shop, Edited bu Stephanie Hendrixon
Quality 101: Surface Finish Measurement Basics article Click to view Source: Mahr Federal Inc.
724-368-8006 * Fax 724-368-8005